audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Headlamp Range Control Positioning Motor|Page 10413 > < Headlamp Range Control Positioning Motor|Page 10411
Page 1
background image

Headlamp Alignment Actuator: Service and Repair
Halogen Headlamps, From 06.2008

Halogen Headlamps, from 06.2008

Observe notes on contact corrosion => [ Contact Corrosion ] See: Service Precautions.

‹› After any measures that could affect headlamp aim, headlamps must be readjusted.

Headlamp Beam Adjustment Motor

Removing

-

Switch off ignition and remove ignition key.

-

Turn light switch into "0" position.

-

Remove the front wheel housing liner => Body Exterior

 66 Removal and Installation.

-

Turn the housing cover - 1 - counterclockwise -  arrow - and remove it from the headlamp housing.

-

Release the headlamp range control positioning motor -  -: on the left headlamp by turning it counterclockwise -  arrow -; on the right headlamp
by turning it clockwise.

Headlamp Range Control Positioning Motor|Page 10413 > < Headlamp Range Control Positioning Motor|Page 10411