Audi Workshop Service and Repair Manuals

Headlamp Igniter Module: Service and Repair
Bi-Xenon Gas Discharge Headlamps With Cornering Lamp, From 06.2008

Headlamp Power Output Stages

CAUTION:

Danger to life due to high voltage.
-

Usage and safety information for gas discharge headlamps.

Removing

-

With ignition switched off, disconnect battery Ground (GND) wire.

-

Remove headlamp housings.

-

Remove the bolts - arrows -.

-

Remove the headlamp power output stage - 1 - from the headlamp housing.

Installing

Install in reverse order of removal, observing the following:

-

Check the seal - 2 - between the power output stage and headlamp housing.

-

Install the headlamp housing.

Tightening Specifications

Component

Nm

Headlamp power output stage to headlamp housing

1.4 Nm