A3 Quattro V6-3.2L (BUB) (2008)
Fluid - Transfer Case: Service and Repair
Oil In Bevel Box, Draining or Filling After Repair
Oil in Bevel Box, Draining or Filling after Repair - 6 Spd. Direct Shift A/T 02E All Wheel Drive
Note:
^
Oil in bevel box need only be drained off for repair work. It must not be changed: filled for life!
Special tools, testers and auxiliary items required
^
Used oil collection and extraction device V.A.G 1782
^
Protective glasses
Draining oil
^
Vehicle on a flat surface
^
Selector lever in position "P"
^
The engine is switched off.
-
Drive vehicle onto a 4-column lift or over a work pit so that it is absolutely level.
-
Remove center noise insulation fasteners -1 to 3-.
CAUTION
When working in vicinity of cooler, always ensure clearance to fan. Fan can switch on by itself - risk of injury!
-
Place old oil collecting and extracting device V.A.G 1782 beneath transmission.
CAUTION
Wear protective glasses.
Wear acid-resistant protective gloves.
-
Remove drain plug -A-.
-
Allow transmission fluid to drain off.
Filling oil
-
Install bolt -A-, tightening specification.
-
Remove oil filler plug -B-.