A3 Quattro V6-3.2L (BUB) (2008)
Fuel Level Sensor: Testing and Inspection
Fuel Level Sensor (AWD), Checking
Fuel Level Sensor, Checking (AWD)
Special tools, testers and auxiliary items required
-
Hand-held multimeter V.A.G 1526C
-
Connector test set V.A.G 1594C
Test Sequence
-
Remove rear seat bench.
-
Unclip catches - arrows - of right connector flange cover.
-
Disconnect electrical harness connector - arrow - at locking flange.
Vehicles through approximately 11/2004:
NOTE: On vehicles with 2-wire sensor technology, the connector for fuel level sensor G is equipped with 4 terminals.
-
Connect multimeter between terminal - 2 - and - 3 - for resistance measurement.
Fuel Level Sensor G installed:
-
Sensor at lower stop: 265 to 295 Ohms.
-
Sensor at upper stop: 57 to 73 Ohms.