A3 Quattro V6-3.2L (BUB) (2008)
Use New shear bolts when installing the Motronic Engine Control Module (ECM) J220.
Motronic Engine Control Module (ECM) J220 reprogramming
-
The new Engine Control Module (ECM) J220 and immobilizer must be activated.
Final procedures
After repair work, the following work steps must be performed in the following sequence:
1. Check the DTC memory.
2. If necessary, erase the DTC memory.
3. If the DTC memory was erased, generate readiness code.
-
End of diagnosis.