A3 Quattro V6-3.2L (BUB) (2008)
Fuel Level Sensor: Service and Repair
Fuel Level Sensor, Through 11.04
Fuel Level Sensor, through 11.04
Removing
Observe safety precautions => [ Safety Precautions ] See: Fuel Delivery and Air Induction/Service Precautions/Vehicle Damage Warnings/Safety
Precautions/Fuel Supply System.
Observe rules for cleanliness => [ Clean Working Conditions ] See: Fuel Delivery and Air Induction/Service Precautions/Vehicle Damage
Warnings/Clean Working Conditions/Fuel Supply System.
-
Remove fuel delivery unit => [ Fuel Delivery Unit ] See: Fuel Delivery and Air Induction/Fuel Pump/Service and Repair/Fuel Delivery Unit.
CAUTION!
Before remove electrical connectors on Fuel Level Sensor (G), first release contact retaining tabs.
-
Disengage electrical connectors - 1 - and - 2 - and disconnect them.
-
Pry on retaining tabs - 3 - and - 4 - with a screwdriver and pull fuel level sensor (G) off downward - arrow -.
Installing
Installation is in reverse order of removal, note the following:
-
Insert fuel level sensor (G) into guides on the fuel delivery unit and push up until it engages.
-
Connect electrical connections and check that they are securely engaged.
-
Install fuel delivery unit => [ Installing ] See: Fuel Delivery and Air Induction/Fuel Pump/Service and Repair/Fuel Delivery Unit, observing notes
for connecting battery.