A3 Quattro V6-3.2L (BUB) (2008)
Alarm Module: Service and Repair
Inclination/Anti-Theft Control Module
If the control module was replaced, select the "Replace" function for the respective control module in "Guided Fault Finding" or " Guided
Switch off ignition and remove ignition key.
Remove glove compartment.
Release the retaining springs - arrow - and remove the Inclination-/Anti-Theft Control Module (J529) - item 2 - from the bracket.
Disconnect electrical connector - 1 -.
Install in reverse order of removal, observing the following:
Install glove compartment.