A3 Quattro V6-3.2L (BUB) (2008)
-
Turn steering wheel - 3 - about 160° left.
-
Install bolt - 2 - approximately 2 turns.
-
Tighten bolt - 2 - to specified torque.
CAUTION!
Ignition must be on when connecting battery. If pyrotechnic components (e.g. airbag, belt tensioner) are not repaired correctly, they may
deploy unintentionally after connecting battery. There must not be anyone inside the vehicle when connecting the battery.
-
Disconnect the battery ground wire with the ignition switched on.
‹› If Airbag Malfunction Indicator Lamp (MIL) (K75) indicates a fault after installation, DTC memory must be checked, deleted and checked again.
6
Ignition Pill Connector
7
Contact Unit Connector
8
Horn Connector
Steering Column Electronic Systems Control Module (J527) - item 1 - to steering column switch module