A3 Quattro V6-3.2L (BUB) (2008)
/Page-2577005.png)
Removing
CAUTION!
Follow the safety precautions for pyrotechnic components.
-
Remove driver side airbag unit. Refer to => [ Driver Airbag Unit ].
‹› Wheels must be in straight-ahead position when removing or installing steering wheel.
-
Remove screws - arrows -.
-
Mark steering wheel/steering column position to each other with felt-tip pen.
-
Remove steering wheel - 1 - from steering column.
Installing
Installation is reverse of removal, but note the following:
-
When installing previous steering wheel, ensure markings on steering column/steering wheel line up.
-
A new steering wheel (without marking) must be installed in center position (steering wheel spoke must be horizontal and wheels straight).
-
Perform test drive.
-
If steering wheel is crooked, remove again and place on steering column splines.
-
Always install steering wheel with a new screw.
-
Install driver side airbag unit.
Tightening Specifications
*
Replace screw.
