A3 Quattro V6-3.2L (BUB) (2008)
Seat Belt Buckle Switch: Service and Repair
Belt Fastening Detection
‹› The Front Passenger's Seat Occupied Sensor (G128 ) is only installed on passenger side.
Removing
CAUTION!
Follow the safety precautions for pyrotechnic components.
-
Remove passenger seat:
‹› Manual seat=> [ Front Manual Seat ] See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Front Manual Seats
‹› Power seat => [ Power Seat ] See: Body and Frame/Seats/Service and Repair/Removal and Replacement/Power Front Seats
‹› Remove padding only until Front Passenger's Seat Occupied Sensor (G128) - 2 - has been freed up!
-
Remove seat pan cover and padding. Refer to => [ Seat Pan Cover and Cushion ] See: Body and Frame/Seats/Service and Repair/Overhaul/Front
Seat Covers and Cushion
-
Remove Front Passenger's Seat Occupied Sensor ( G128) connector - 2 -.
-
Carefully remove Front Passenger's Seat Occupied Sensor (G128) - 2 - from seat padding - 1 -.
Installing
CAUTION!
Follow the safety precautions for pyrotechnic components.
To install, perform the steps used in removal in reverse order. Observe the following when doing so:
-
Position circuit board - 4 - from Front Passenger's Seat Occupied Sensor (G128) - 2 - in cut-out - 3 - in seat padding - 1 -.