A3 Quattro V6-3.2L (BUB) (2008)
Power Window Safety Switch: Service and Repair
Driver Window Regulator Switches
Driver Window Regulator Switches
Removing
-
Switch off ignition and remove ignition key.
-
Remove front door trim.
-
Detach insulating mat from door trim.
-
Remove bolts - arrows - and remove the armrest.
-
Unplug connector.
-
Release fasteners on armrest side by pressing retaining element - arrows -.
-
Use small screwdriver to carefully release fasteners - 2 - and - 3 - on trim side.
-
Pull window regulator switch - 1 - downward out of the switch mount.
Installing
Install in reverse order of removal, noting the following:
-
Press window regulator switch into switch mount until catches engage.