A3 Quattro V6-3.2L (BUB) (2008)
CAUTION!
Risk of steering lock seizing.
‹› Do not actuate the steering lock without the lock cylinder. A blocked steering lock must be replaced.
‹› When replacing the lock cylinder, follow the instructions regarding the immobilizer induction coil.
-
Disconnect electrical harness connector at induction coil.
Installing
Install in reverse order of removal, noting the following:
-
Insert the replacement key into the lock cylinder and turn it to the ignition "on" position.
-
Slide steel wire or pin - 1 - again into front side as far as stop.
-
Slide lock cylinder - 2 - with induction coil into steering lock housing - 3 -.
-
Then remove steel wire and press lock cylinder securely in until catch engages audibly.
-
Connect electrical connector to immobilizer induction coil.
-
Install the steering column switch module trim.