A3 Quattro V6-3.2L (BUB) (2008)
-
Remove the nut - 3 - and remove the wiring harness bracket - 2 -.
-
Remove the lower screw - 1 - on the starter and then remove the starter.
Installing
Install in reverse order of removal, observing the following:
-
Install the air filter housing => Fuel Injection and
Ignition 24 Removal and Installation.
-
Install the noise insulation
-
Connect battery. Required actions => See: Battery/Service and Repair/Removal and Replacement/Battery, Engine Compartment, Disconnecting
and Connecting.
Tightening Specifications