A3 Quattro V6-3.2L (BUB) (2008)
-
Loosen spring clamp - 1 - using hose clamp pliers (VAG 1275) from boot and slide on to tie rod.
-
Remove clamp and pull off boot from steering gear housing.
-
Remove tie rod from steering gear using 38 mm open end wrench insert (VAG 1923).
‹› If corrosion, damage, wear-out or first signs of contamination on steering rack can be seen, complete steering gear must be replaced.
‹› If no grease film is visible on steering rack, steering gear must also be replaced completely.
Installing