A3 Quattro V6-3.2L (BUB) (2008)
Wheel Bearing: Removal and Replacement
Wheel Bearing Housing and Bearing Unit Assembly Overview
Wheel Bearing Housing and Bearing Unit Assembly Overview
1
Suspension Strut
2
Tie Rod End
3
Bolt
‹› 70 Nm plus an additional 90° turn
‹› Bolt point must face in direction of travel
‹› Always replace after removal
4
Bolt
‹› 8 Nm
‹› M6 x 16
5
Left Front ABS Wheel Speed Sensor (G47)/Right Front ABS Wheel Speed Sensor (G45)
‹› Can be tested in "Guided Fault Finding" using the Vehicle Diagnosis, Testing and Information system (VAS 5051B ).
‹› Before inserting the sensor, clean the inner surface of bore hole and coat with securing grease.