Audi Workshop Service and Repair Manuals

Installing

Install in reverse sequence; note the following points:

Torque specifications: => [ Oil Pan, Mechatronic, Transmission Oil Pump ] See: Fluid Pan/Service and Repair/02E Transmission/Oil Pan,
Mechatronic, Transmission Oil Pump

-

Push shaft - A - for the transmission fluid pump into the transmission up to the stop, turning slightly if necessary.

‹› Installed dimension of shaft - a - = approximately 23 mm.

-

If necessary, carefully remove metal shavings on sensor wheel -  B -, however the sensor wheel must not be demagnetized.

-

Remove paper seal between transmission fluid pump and transmission.