A3 Quattro V6-3.2L (BUB) (2008)
-
Secure bevel box output flange with Stop Plate T10108/1 by installing M10x30 bolts -arrows -.
-
Remove hex nut for output flange.
A - Socket attachment SW 36 for 3/4 inch drive
-
Pivot bevel box so that output shaft faces upward.
-
Remove output shaft from bevel box shaft bevel gear.
A - Three-arm puller, e.g. Kukko 45-2
Note:
^
When removing output shaft, inner race/tapered roller bearing remains on output shaft and must be removed from it.
-
Place thrust pad 40-105 on output flange.
-
Remove inner race/tapered roller bearing from output flange with tapered roller bearing puller.
Note:
^
You can also use attachment V.A.G 1582/6A instead of attachment V.A.G 1582/6.