A3 Quattro V6-3.2L (BUB) (2008)
-
Pull in output flange with two arm puller -A-.
A - Two-arm puller, e.g. Kukko 20/10
-
Position pulling hook on underside of drive pinion housing.
-
Coat threads on new hex nut with Locking Compound D 000 600.
-
Tighten new output flange hex nut, tightening torque
A - Socket attachment SW 36 for 3/4 inch drive
-
Install bevel gear transfer case.
-
Add gear oil to bevel box.