A3 Quattro V6-3.2L (BUB) (2008)
2
-
Rear doors
3
-
Collared shoulder bolt
-
32 Nm
4
-
Cover
-
After combination bolts - 5 - have been tightened to tightening torque (32 Nm), press covers into door trim.
5
-
Combination bolt
-
32 Nm
-
Before tightening combination bolts to tightening torque, adjustment bushings must make contact using an Allen wrench (width across flats
9 mm).
6
-
Collar screws
-
3.5 Nm
7
-
Collar screws
-
6 Nm
8
-
Bolt
-
6 Nm
Window Regulator Motor, Removing
-
To remove, unscrew bolts - 2 - and remove window regulator motor.
-
Install window regulator motor.
Upper Door Hinge
-
Torx bolt T 45 - 1 - (2 x installed from interior of vehicle) 32 Nm.
-
Upper door hinge - 2 -.
-
Fitting bolt - 3 - Torx bolt T 45 32 Nm.