A3 Quattro V6-3.2L (BUB) (2008)
Windshield Washer Reservoir: Service and Repair
Windshield Washer Fluid Reservoir
Windshield Washer Fluid Reservoir
Special tools, testers and auxiliary items required
‹› Reservoir
Removing
-
Switch off ignition and remove ignition key.
-
Remove the washer fluid reservoir filler neck => [ Washer Fluid Reservoir Filler Neck ].
-
Remove the front section of the front right wheel housing liner
-
Remove fog lamp => [ Fog Lamp, through 05.2008 ] See: Lighting and Horns/Fog/Driving Lamp/Service and Repair/Fog Lamp, Through 05.2008
.
-
Place a reservoir under the washer fluid reservoir.
-
Disconnect the electrical connector - 5 -.
-
Loosen the wiring harness - 4 - from the mount on the washer fluid reservoir.
-
Open the clamp - 6 - - right arrow - and disconnect the fluid line - 7 - from the washer fluid pump.
Vehicles with headlamp washer system:
-
Disconnect the electrical connector - 3 -.
-
Open the clamp - 2 - - left arrow - and disconnect the washer fluid line - 1 - from the pump for the headlamp washer system.
All Vehicles