A3 Quattro V6-3.2L (CBRA) (2009)
-
Remove bolts - B - (tightening torque 10 Nm).
-
Slide bracket - C - out of mount of condenser - E - downward - arrows -.
-
Remove the reservoir - D - from the condenser - E - - arrow -.
-
Seal open connections (against dirt and moisture penetration).
Installing
‹› There are different versions of the condenser and bracket - C - depending on the production time period. As a running change in MY 2006, the
mounting was changed from a metal bracket attached by screws to a plastic bracket held in place by expansion clips.
‹› Fluid reservoir - C - and condenser - B - is available in different versions. At start of production, reservoirs were installed. which had o-rings - A -
and - B - on the reservoir connections.