A3 Quattro V6-3.2L (CBRA) (2009)
/Page-2179002.png)
-
Install union nut - 1 - on tire pressure sensor - 2 -.
-
Press tire pressure sensor - 1 - onto rim well and tighten union nut. Refer to => [ Tire Pressure Monitoring Sensor Assembly Overview ] See:
Service and Repair/Removal and Replacement/Tire Pressure Monitoring Sensor Assembly Overview.
‹› After installing, tire pressure sensor must lie firmly in its bed.
‹› Sealing washer - arrow - becomes slightly deformed when doing this.
