A3 Quattro V6-3.2L (CBRA) (2009)
Power Door Lock Control Module: Service and Repair
Comfort System Central Control Module
Special tools, testers and auxiliary items required
‹› Pry lever (80-200)
Removing
-
Component location, in luggage compartment right rear below side trim.
-
Right rear luggage compartment trim removed.
-
Disconnect the connectors - 1 - and - 2 -.
-
Remove nuts - arrow - and remove holding plate from control module.
-
Lay open the wiring harness at holding plate using lever 80-200.
-
Disconnect electrical harness connectors - 1 - to - 3 -.