A4 Cabriolet L4-1.8L Turbo (AMB) (2005)
Headlamp Igniter Module: Service and Repair
Igniter For Gas Discharge Lamps -N195-, Removing And Installing
CAUTION: High voltage: Make sure to disconnect battery Ground (GND) strap before performing work on parts of High intensity gas discharge
(xenon) headlights marked with yellow high voltage symbols.
Removing
-
Remove headlight.
-
Remove bolts -arrows- and retaining bracket -2-.
-
Remove igniter -1- for high intensity gas discharge (Xenon) from headlight housing and disconnect electrical harness connectors.
Installing
Installation is reverse of removal, paying attention to the following:
-
Check seal between igniter for gas discharge lamp and headlight housing.
-
Install headlight.
Tightening torque
Component
Nm
Igniter for gas discharge lamp to headlight
1.2