audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Relays and Modules - Cooling System > < All Technical Service Bulletins for Power Door Lock Control Module:|571005|Page 101
Page 1
background image

Power Seat Control Module: Service and Repair

Control Unit, Removing And Installing

NOTE:

-

The control unit for the memory seat and the electric seat is under the drivers seat.

-

If the control unit is defective, the top support of the seat pan and backrest must be removed.

-

Remove seat.

-

Remove bolts - 2 - (2x). Tightening torque 1.5 Nm

-

Turn control unit - 1 - over.

-

Disengage retaining clip - 4 - and disconnect connector - 5 -.

-

Press retainer tabs - 3 - (2x) and disconnect connector - 2 -.

-

Remove control unit - 1 -.

-

Installing
-

Installation is in reverse order of removal.

Relays and Modules - Cooling System > < All Technical Service Bulletins for Power Door Lock Control Module:|571005|Page 101