A4 Cabriolet L4-1.8L Turbo (AMB) (2005)
-
Spray entire surface of sensor foil with cleaning solution D 009 401 04 and insert sensor in mirror base.
CAUTION: Rain sensor must be free of inclusions and bubbles on the windshield to function properly.
-
Press sensor retaining clamps on mirror base.
Replacing rain sensor
NOTE: To remove sensor, proceed as described above.
-
If necessary, completely remove foil remnants from windshield.
-
Clean sensor contact surface on windshield with cleaning solution D 009 401 04.
-
Peel off protective foil from rain sensor.
-
Spray entire surface of sensor foil with cleaning solution D 009 401 04 and insert sensor in mirror base.
-
Press sensor onto windshield without bubbles and place retaining clamps on mirror base.
CAUTION: Rain sensor must be free of inclusions and bubbles on the windshield to function properly.