A4 Cabriolet L4-1.8L Turbo (AMB) (2005)
Shift Interlock Solenoid: Service and Repair
Shift Lock Solenoid N1 10 removing and installing, 01J, CVT A/T FWD
Removing
-
Remove shift mechanism cover.
-
Disconnect electrical harness connector from Shift Lock Solenoid N110.
-
Release tabs and remove shift lock solenoid from the front -arrows-.
Installing
Installation is performed in reverse order of removal. Note the following:
-
Press shift lock solenoid into guide until it engages; operating solenoid lever -2- must engage in locking lever -1- on shift mechanism.
-
Install shift mechanism cover.