A4 Cabriolet L4-1.8L Turbo (AMB) (2005)
Transmission Position Switch/Sensor: Service and Repair
Tiptronic Switch F189, removing and installing, 01J, CVT A/T FWD
To replace Tiptronic switch, the circuit board must be replaced.
Removing
-
Remove shift mechanism cover.
-
Press down retaining hooks -arrows- and pull cover -2- from guide -1-.
-
Remove circuit board with integrated Tiptronic Switch F189.
-
Carefully separate two halves of guide plate by prying them apart -arrows-.
-
Remove roll cover with magnet for Tiptronic Switch F189.
Installing
Installation is performed in reverse order of removal. Note the following:
-
Install shift mechanism cover.