A4 Cabriolet L4-2.0L Turbo (BWT) (2007)
NOTE: Both bands must be re-riveted on shared mounting point in bracket - arrow - during installation.
-
Remove bolt- B -for center brace rail spring "5" - A -.
-
On first generation vehicles, check protective glide foil - arrows - on center bracket and on rail "5" for damage.
-
Remove rivet - arrow - on rail "5".
The following parts are secured at this rivet connection:
1
-
Bracket strap - rail 5
2
-
Cable spring - headliner (across)
3
-
Cable eyelet - headliner
4
-
Center brace spring - rail 5
-
Remove bolt - A - and slide rubber strap - 1 - sideways from rail "3".
-
Remove rivet - B - on rail "4" and remove band - 2 -.
-
Remove rivet - C - from center brace and rivet - D - from rail "4".
-
Remove band - 1 - and band - 3 -.