A4 Cabriolet L4-2.0L Turbo (BWT) (2007)
-
Remove rivet - A - and remove cable bracket - 1 - from roof guide "2".
-
Remove bolt - B - and remove cable channel - 2 - from diverting linkage on inside of
main guide and from main guide.
-
Remove wiring harness.
NOTE: When installing, ensure there are sufficient wire loops between wiring bracket - 1 - and cable channel - 2 - so that wiring harness will not
be rubbed or bent.
-
Check double-sided tape on outside of main guide - arrows - for damage.
NOTE: The convertible top upholstery is secured to the main guide with the help of the adhesive tape.
-
Remove convertible top frame.
Installation is reverse of removal.