A4 Cabriolet L4-2.0L Turbo (BWT) (2007)
-
Install storage compartment on drivers side.
Removing and installing clutch pedal starter interlock switch F194
Note:
^
To ensure a secure fit, the clutch pedal starter interlock switch F194 must not be installed more than once.
Removing
-
Remove storage compartment on drivers side.
-
Disconnect electrical connector - 3 - on clutch pedal starter interlock switch.
-
Press clutch pedal - 1 - all the way down and hold it in this position.
-
At the same time, release clutch pedal starter interlock switch - 2 - by turning it 45° in the direction indicated - arrow - and pull it out of the guide.
Installing
-
Pull out operating rod - arrow - all the way before installing clutch pedal switch.