A4 Cabriolet L4-2.0L Turbo (BWT) (2007)
/Page-1675003.png)
of the other. Only in this way is the adjustment correct; you must mark the cylinder for correct installation, if necessary.
-
Last, insert new upper shim - 5 - of same thickness as old in input shaft.
‹› For the following measurements, all tool and component surfaces must be completely clean in order to obtain exact values.
-
Place 4 calipers (T40101) on upper shim.
-
Lay a ruler (T40100) centered over every 2 calipers (T40101).