A4 Cabriolet V6-3.0L (AVK) (2003)
-
Remove securing ring -A-.
-
Remove pulley -B-.
Installing
-
Installation is reverse of removal.
NOTE:
-
Replace securing ring -A-.
-
When installing securing ring -A-, make sure it is not bent up more than is necessary for installation.
-
Insert securing ring -A- on proper side, the side with installing slopes -C- faces away from compressor (install flat side facing compressor).
-
Ensure proper seating of securing ring in groove on compressor flange.
-
Clean compressor flange before installing the pulley, as pulley must be able to be installed easily. (Installing must be possible without excessive
force).