A4 Cabriolet V6-3.0L (AVK) (2003)
-
Use a screwdriver to pry out retaining clip -C- and then pull out line -13slightly.
-
Remove bolt from brake fluid reservoir -1- and disconnect connector from fluid level below.
Note: Do not remove the brake fluid reservoir.
Note:
^
For ease of illustration, brake fluid reservoir is not shown.
^
To remove the top Torx bolt, swivel brake fluid reservoir slightly to one side.
-
Remove the two Torx bolts -arrows-.
-
Remove vacuum line from brake servo -1-
-
Remove driver's side storage compartment.
-
Detach brake pedal from brake servo.
-
Disconnect steering column from steering gear -arrow A-.