A4 Cabriolet V6-3.0L (AVK) (2003)
Axle Shaft Assembly: Service and Repair
Component Overview
Component overview
Grease quantities and types
Grease CV joint with G 000 603 grease
Re-grease joint when replacing CV boot.
1. Hex bolt
^
Always replace after removal
^
Tightening torque:
Bolt M16: 190 Nm plus additional 180° (1/2-turn)
2. Outer CV joint
3. Snap ring
^
Always replace
^
Insert in ring groove of shaft before installation (not visible on installed joint)
4. Clamp
5. CV boot for outer Constant Velocity (CV) joint
^
Check for tears and chafing
^
Before tightening clamp, briefly raise CV boot to allow pressure to equalize.
6. Drive axle
^
Different versions - Go to see Parts catalog
7. Cover
^
Always replace
8. Gasket
^
Always replace
9. Snap ring
^
Always replace
^
insert in groove on shaft