A4 Cabriolet Mk2
Removing glove box |
– | Switch off ignition and remove ignition key. |
– | With ignition switched off, disconnect earth wire at battery → Electrical system; Rep. Gr.27. |
– | Unclip dash panel end trim. |
WARNING
|
– | Unplug connector -4- for glove box light. |
– | Unscrew bolts -1- (4x). |
– | Remove bolt -2-. |
– | Open glove box lid and unscrew bolts -3- (3x). |
– | Pull retaining plate -5- approx. 1 cm to side in direction of -arrow- and release catch. |
– | Take out glove box. |
1 - | Bolts (4x) |
q | Tightening torque: 4 Nm |
2 - | Bolt (1x) |
q | Tightening torque: 4 Nm |
3 - | Bolts (3x) |
q | Tightening torque: 4 Nm |
4 - | Connector |
q | For glove box light |
5 - | Retaining plate |