audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

Converting glove box > < Retrofitting key-operated switch (Audi A6 1998 ? from week 36/1998 onwards including Audi Allroad, except vehicles with V8 engin
Removing glove box
   
Removing glove box
1 - Glove box
t  Removing
–  Switch off ignition and remove ignition key.
–  With ignition switched off, disconnect earth wire at battery → Electrical system; Rep. Gr.27.
–  Open glove box lid and unscrew bolts -3- (3x).
–  Unscrew bolts -4- (2x).
–  Take out glove box downwards.
  WARNING
Before unplugging the connectors, discharge static by briefly touching door striker plate for example.
–  Unplug connector of supply lead/wiring harness for glove box -2-.
2 - Connector
q   Of supply lead/wiring harness for glove box
3 - Bolts (3x)
q   Tightening torque: 5 Nm
4 - Bolts (2x)
q   Tightening torque: 5 Nm
5 - Strip
6 - Rubber stops
7 - Dash panel

   

Converting glove box > < Retrofitting key-operated switch (Audi A6 1998 ? from week 36/1998 onwards including Audi Allroad, except vehicles with V8 engin