A4 Cabriolet Mk2
Removing and installing cable for bonnet |
1 - | Cable for bonnet |
q | Removing: |
– | Remove front wheel housing liner → Chapter. |
– | Remove the driver's storage compartment → Rep. Gr.68. |
– | Unscrew bolt → Item. |
– | Detach clip → Item. |
– | Unclip cable from bottom part of bonnet lock and disengage eyelet -arrow A-. |
– | Once these have been unfastened, take cable → Item out of clips → Item and pull it into wheel housing towards lock carrier. |
q | Install in reverse order. |
q | Move ball of cable into installation position at bottom part of bonnet lock. |
2 - | Operating lever |
3 - | Bolt |
q | 2.4 Nm |
4 - | Clip |
5 - | Bottom part of bonnet lock |
q | Removing and installing → Chapter |
q | Can be used to adjust height of bonnet |
6 - | Clip |