audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing convertible top tensioner position sender G356 > < Removing and installing convertible top lock motor V223 / convertible top lock open switch F294 / convertible top lock closed s

A4 Cabriolet Mk2

Removing convertible top position switch (convertible top stowed switchF171/convertible top front switchF202)
Removing convertible top position switch (convertible top stowed switch -F171-/convertible top front switch -F202-)
   
–  Remove the rear side trim → Rep. Gr.70.
–  Unplug connector at convertible top operation control unit -J256-.
–  Remove convertible top cables from guides and cable ties of body panel and convertible top structure.
  A61-0266
–  Remove the bolts of the switch -1-.
–  Pull convertible top position switch carefully out of attachment point mounts.
  Note
t  The convertible top switch unit described is located at the right main support.
t  Set the convertible top to the corresponding position to remove the appropriate convertible top switch unit screw.
Tightening torque → Chapter
  A61-0213

Removing convertible top tensioner position sender G356 > < Removing and installing convertible top lock motor V223 / convertible top lock open switch F294 / convertible top lock closed s