A4 Cabriolet Mk2
| Removing and installing mirror housing |
| 1 - | Mirror housing |
| q | Removing: |
| – | Screw bolts → Item out of cover panel → Item and detach panel downwards. |
| – | Release housing from fasteners of mirror adjustment unit and lift off housing. |
| q | Installing: |
| – | Position mirror housing from above on mirror adjustment unit → Item. |
| – | Fasteners -arrows- must engage in mirror adjustment unit at top and bottom → Fig. |
| 2 - | Mirror adjustment unit |
| 3 - | Lower cover |
| 4 - | Bolts |
| q | 1 Nm |
|
|
