Audi Workshop Service and Repair Manuals

Fitting locations

1 -	Front passenger door control unit -J387-

q	Fitting location → Fig.

2 -	Interior monitor sender/receiver module 2 -G305-

q	Fitting location → Fig.

3 -	Rear right window regulator motor -V27-

q	Fitting location → Fig.

4 -	Alarm horn -H12-

q	Fitting location → Fig.

5 -	Tank filler flap locking motor -V155-

q	Fitting location → Fig.

6 -	Rear lid release motor -V139-

q	Fitting location → Fig.

7 -	Rear left window regulator motor -V26-

q	Fitting location → Fig.

8 -	Interior monitor sender/receiver module 1 -G303-

q	Fitting location → Fig.

9 -	Driver door control unit -J386-

q	Fitting location → Fig.

10 -	Convenience system central control unit -J393-

q	Fitting location → Fig.

11 -	Bonnet contact switch -F266-

q	Fitting location → Fig.

Front passenger door control unit -J387- l  Integrated into window lifter motor

Interior monitor sender/receiver module 2 -G305- l  Between front seats in centre console beneath grip moulding of handbrake lever

Rear right window regulator motor -V27- l  At rear right behind side trim

Alarm horn -H12- l  In convertible top compartment on right behind side trim

Tank filler flap locking motor -V155- l  In luggage compartment on right behind side trim

Rear lid release motor -V139- l  In luggage compartment at rear lid lock

Rear left window regulator motor -V26- l  At rear left behind side trim

Interior monitor sender/receiver module 1 -G303- l  Beneath rear seat bench

Driver door control unit -J386- l  Integrated into window lifter motor

Convenience system central control unit -J393- l  At front left sill panel

Bonnet contact switch -F266- l  In lock carrier

Filler neck compartment lid 5 -  1.5 Nm