audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing impact strip > < Exploded view of window lifter

A4 Cabriolet Mk2

Removing and installing window lifter
Removing and installing window lifter
  Note
The positions of the adjusting screws and nuts should be marked before unfastening.
Removing
–  Remove the door trim  → Rep. Gr.70.
–  Mark the positions of the bolts and nuts.
–  Completely close the window.
–  Remove the window → Chapter.
–  Remove window lifter motor → Chapter.
–  Remove the bass loudspeakers.
–  Remove the rear view mirror → Chapter.
   
–  Unscrew the nuts -1-, -3- and -4-.
–  Unclip the cables.
–  Swivel the rear linkage -5- forwards at the bottom.
–  Swivel the front linkage -2- to the rear at the top.
–  Take the window lifter out of the door.
Installing
Install in reverse order.
–  Perform basic setting following installation → Chapter.
Tightening torques → Chapter
  A57-10200

Removing and installing impact strip > < Exploded view of window lifter