A4 Cabriolet Mk2
| Removing and installing insulation box |
| 1 - | Cold air hose |
| 2 - | Glove box |
| 3 - | Bolts (3x) |
| q | Tightening torque: 0.6 Nm |
| 4 - | Insulation box |
| t | Removing |
| – | Remove vent -5-. |
| – | Slacken off bolts -3- (3x) and carefully pull insulation box out off glove box -2-. |
Note| When installing, start by fitting cold air hose -1- and bolting it to vent -5-. |
| 5 - | Vent |
| q | Tighten as far as possible |
