audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing and installing side trim (tunnel side) > < Removing and installing backrest adjuster

A4 Cabriolet Mk2

Special tools and workshop equipment required
   
Special tools and workshop equipment required
t  Assembly tool -3399-
t  Removing
  W00-0165
–  Turn backrest adjuster -1- until detent is visible from rear -arrow A-. Use flashlamp if necessary.
–  Hook in assembly tool -3399--2- and lever in direction of arrow -B-.
–  Turn backrest adjuster -1- a further 120 °.
–  Hook in assembly tool -3399- -2- and lever in direction of arrow -B-.
–  Detach backrest adjuster -1-.
t  Installing
  Note
Renew backrest adjuster if it is too loose after assembly.
  A72-0172

Removing and installing side trim (tunnel side) > < Removing and installing backrest adjuster