audi Workshop Repair Guides

Audi A4 Cabriolet Workshop Service and Repair Manuals

ABOUT US
Removing and installing seat height adjuster > < Removing and installing side trim panels

Removing and Installing Backrest Adjuster Knob | RS Bucket Seat (Front)

Removing and installing backrest adjuster knob
Removing and installing backrest adjuster knob
   
Removing
–  Push side trim -2- slightly towards backrest.
–  Use a screwdriver to lift retaining catch -1- up slightly and disengage.
–  Turn backrest adjuster knob -3- and disengage another retaining catch.
–  Remove backrest adjuster knob.
Installing
Installation is carried out in the reverse order; note the following:
–  Push on adjuster knob until it engages audibly.
  Note
If backrest adjuster knob has come loose on adjusting shaft, backrest adjuster knob must be renewed.
  A72-10109

Removing and installing seat height adjuster > < Removing and installing side trim panels