A4 Cabriolet Mk2
Removing and installing cover and padding for rear seat bench |
1 - | Padding |
2 - | Fastening strips (2x) |
3 - | Fastening strips (4x) |
4 - | Seat cover |
t | Removing |
– | Remove rear seat bench → Chapter. |
– | Slide fastening strips -2- (2x) apart in opposite directions. |
– | Prise out fastening strips -3- (4x). |
– | Pinch off wire clips -5-. |
– | Fold back cover -4-. |
– | Lift off cover -4- and pinch off wire clips -5-. |
– | Detach padding -1-. |
t | Installing |
– | Renew wire clips -5-. |
– | Fit cover and padding in reverse order to removal. |
5 - | Wire clips |