A4 Cabriolet Mk2
Removing and installing A-pillar trim (top) |
1 - | A-pillar trim (top) |
t | Removing |
– | Remove wind deflector trim → Chapter. |
– | Unclip upper section of A-pillar trim (bottom). |
– | Prise out A-pillar trim (top) -1- at clips -2- (3x). |
– | Detach A-pillar trim (top) -1-. |
t | Removing |
– | When installing, make sure rubber door seal is properly fitted over A-pillar trim (top) -1-. |
– | Install A-pillar trim (top) -1- in reverse order of removal. |
2 - | Clips (3x) |