audi Workshop Repair Guides

Audi Workshop Service and Repair Manuals

ABOUT US
Removing slider for variable convertible roof compartment > < Installing

A4 Cabriolet Mk2

Removing rack for variable convertible roof compartment
Removing rack for variable convertible roof compartment
–  Remove variable convertible roof compartment → Chapter.
   
–  Pull off floor covering -1- (convertible roof compartment lining) on relevant side to such an extent that the two bolts -2- can be accessed.
t  Bond on floor covering with D 001 200.
–  Remove bolts -2- (2x).
t  Tightening torque: 4 Nm
–  Separate centre section of convertible roof compartment from side section (right-side) -4-.
  A70-0972
–  Pull apart side sections -1- and -2-.
–  Remove bolts -3- (4x) from inside lid.
t  Tightening torque: 2 Nm
–  Detach inside lid -1-.
  A70-0961
–  Unscrew bolts -1- (4x) on both sides.
t  Tightening torque: 2 Nm
  A70-0962
–  Pull apart sections -1- and -4- upwards.
–  Prise sliders -3- out of fastening mechanism of section -1-.
–  Separate sections -1- and -4-.
  A70-0963
–  Unscrew bolts -2- (3x).
t  Tightening torque: 2.5 Nm
–  Take out rack -1-.
  A70-0967

Removing slider for variable convertible roof compartment > < Installing