A4 Cabriolet Mk2
| Removing trim for handle mounting |
| 1 - | Trim for handle mounting |
Note| The convertible roof must be closed. |
| q | Use small flat screwdriver to prise out cover -2-. |
| q | Unscrew bolt -3-. |
| q | Fold over handle. |
| q | Use small flat screwdriver to prise out cover -2- on other side. |
| q | Unscrew second bolt -3-. |
| q | Unscrew bolts -4- from underneath. |
| q | Unfasten trim for handle mounting -1- at clips -5- (2x). |
| q | Prise out clip -6- (always renew clip -6-). |
| q | Disengage Bowden cable -7- at handle. |
| 2 - | Cover (2x) |
| 3 - | Bolts (2x) |
| q | Tightening torque: 9 Nm |
| 4 - | Bolts (2x) |
| q | Tightening torque: 7 Nm |
| 5 - | Clips (2x) |
| 6 - | Clip |
| q | Always renew |
| 7 - | Bowden cable |
