A4 Cabriolet Mk2
| Servicing brake calipers |
Note| t | Use only methylated spirits to clean the brake caliper |
| t | Install complete repair kit when servicing. |
| t | New brake calipers are filled with brake fluid and are pre-bled. |
| t | Apply thin coat of lithium grease -G 052 150 A2- to brake cylinder, piston and seal. |
| 1 - | Dust cap |
| q | Fit onto bleeder valve |
| 2 - | Bleeder valve, 12 Nm |
| q | Before screwing in, grease thread with thin coat of lithium grease -G 052 150 A2- |
| 3 - | Brake caliper housing |
| 4 - | Seal for 32 mm piston |
| q | Removing and installing → Chapter |
| 5 - | Seal for 28 mm piston |
| q | Removing and installing → Chapter |
| 6 - | Piston, 32 mm |
| q | Removing and installing → Chapter |
| q | Apply a thin coat of lithium grease -G 052 150 A2- to piston |
| 7 - | Piston, 28 mm |
| q | Removing and installing → Chapter |
| q | Apply a thin coat of lithium grease -G 052 150 A2- to piston |
| 8 - | Protective cap for 32 mm piston |
| q | Do not damage when inserting piston |
| 9 - | Protective cap for 28 mm piston |
| q | Do not damage when inserting piston |
| 10 - | Support plate |
| 11 - | Hexagon socket head bolt, 6 Nm |
| 12 - | Connecting pipe, 17 Nm |
